Upload art and get acrylic stand cut lines
Flattens the bottom, adds a tab that slots into a base, and draws the slotted base too. Everything is free.
Drag your PNG or JPG image hereChoose your PNG or JPG image
PNG, JPG & WebP · automatic tab and base slot · PDF with a white ink layer
- Your files are never uploaded Cut lines and files are made right in your browser
- Every feature is free
Done in 3 steps
Upload art & edit the stand cut line
Add a PNG or JPG and the flat bottom, tab and slotted base appear automatically. Set the acrylic thickness, tab width and slot clearance.
Sheet layout
Choose the paper and quantities, and the pieces and bases are laid out together.
Download
Use the Acrylic goods preset to save a print-ready PDF with the piece and base cut lines and the white ink layer.
One drawing,
a stand that slots into its base
A clear acrylic border and cut line go around your art, the bottom is flattened and a tab is added to slot into the base. The slotted base is made too.
- Clear acrylic — the acrylic inside the cut line
- Cut line — where the blade goes
Acrylic standFrequently asked questions
Answers to what people ask most when making their first acrylic stand.
How is the base made?
You get a separate oval or rounded-rectangle base sized to your piece, with a slot in the middle for the tab. The base is included in the sheet layout and in your files.
How are the tab and slot sized?
The slot uses the actual tab width that fits the piece, acrylic thickness and clearance. Laser kerf compensation also adjusts the slot. Defaults are 3mm acrylic, a requested 15mm tab and 0.2mm clearance. Check the actual tab width shown in the editor.
How much slot clearance do I need?
It depends on the maker’s laser and acrylic tolerance, so there is no single right value. Order a small batch with the 0.2mm default, then reduce it if the fit is loose or increase it if it is tight.
Will a piece with a round bottom stand up?
The bottom is flattened and the tab placed where it can connect to the piece. A small base or artwork leaning to one side may trigger a stability warning. This is a simplified calculation assuming acrylic of uniform thickness and density; adjust the base and test the physical assembly.
Sticker & acrylic goods guides
Makes acrylic stand cut lines with a tab and a matching slotted base.